Bemærk: Dette websted indeholder et tilgængelighedssystem. Tryk på Control-F11 for at justere hjemmesiden til synshandicappede, der bruger en skærmlæser; Tryk på Control-F10 for at åbne en tilgængelighedsmenu.

Useful tips when camera doesn't work properly - ideapad

Find useful tips when camera doesn't work properly on ideapad

Find din enhed
For at være sikker på, at dette indhold gælder for den enhed, du har brug for oplysninger om, skal du indtaste dit serienummer eller vælge dit produkt. eller  Søg efter produkt

Find useful tips when camera doesn't work properly on ideapad

Description

Useful tips when webcam doesn't open properly.

Applicable Brands

ideapad

Applicable Systems

Windows 10

Solution

Testing With Shortcut Keys

Simultaneously press the Fn + F8 or F8 keys on the keyboard.

Enabling Via Lenovo Vantage

Open Lenovo Vantage. Go to Quick settings and check if the Camera option is Enabled. If not, Enable.

Energy Drainage

  1. Turn off the system, if connected.
  2. Remove all peripherals from the system (headphones, charger, flash drive, etc.).
  3. Keep the POWER button pressed for 30 seconds.
  4. After waiting 30 seconds, switch on the system.

Update Camera Drivers

  1. Access the website https://support.lenovo.com.
  2. Enter the serial number or model and click search to find the system.
  3. Click Drivers & Software.
    Drivers and Software
  4. Select the Select Drivers option under Manual Update (or use Scan Now to automatically update drivers).
    Update
  5. Install the appropriate driver, and then restart the machine.

Enable Camera in Device Manager

  1. Press the Windows + R keys and enter the command devmgmt.msc. Select OK. This opens Device Manager.
    Run command
  2. Go to the Cameras subgroup. Select the camera below and right-click.
  3. Check if there is an Enable Device option.
  4. If the option is available, click to activate the camera.

Note: Some software may disable the camera for security reasons, such as antivirus.

If the previous step does not work:

  1. Press the Windows + R keys and enter the command devmgmt.msc. This opens Device Manager.
  2. Go to the Cameras subgroup. Select the camera below and right-click.
  3. Click Uninstall.
  4. Restart the machine and see if this works.

Dokument-id:HT510456
Original offentliggørelsesdato:05/15/2020
Dato for sidste ændring:12/05/2024