終止開發支援

不再支援該產品(開發支援終止),並且將不再提供任何軟體更新. Lenovo提供的任何軟體或支援資源均按“現狀”提供,沒有任何形式上的保證. 聯想保固仍涵蓋的產品將進行維修.

(Linux Only) BIOS Update for Windows 10 (64-bit) - ideapad 710S-13ISK

(Linux Only) BIOS Update for Windows 10 (64-bit) - ideapad 710S-13ISK

在此文件
兼容設備兼容的操作系統還有什麼
可用的驅動程序
文件名
大小
版本
作業系統
發佈日期
嚴重性
選項

(Linux Only) BIOS Update for Windows 10 (64-bit) - ideapad 710S-13ISK

4.244 MB
0NCN27S2

Windows 10 (64-bit)

27 Oct 2016
可選的

(Linux Only) BIOS Update

0ncn27s2.exe

4.24 MB
0NCN27S2

Windows 10 (64-bit)

27 Oct 2016
可選的

(Linux Only) BIOS Update Readme

0ncn27s2.txt

4 KB
0NCN27S2

Windows 10 (64-bit)

27 Oct 2016
可選的

內容描述

(Linux Only) BIOS Update for Windows 10 (64-bit) - ideapad 710S-13ISK

兼容設備

  • Yoga 900-13ISK2

兼容的操作系統

  • Microsoft Windows 10 (64-bit)

還有什麼



Important Information


  • BIOS, abbreviation of Basic Input/Output System, is integrated in ROM chip on main board, which contains the basic input/output program, system configuration information, system startup self-check and pre-setup programs. BIOS provides most basic low-level hardware operations; it is the connection between software and hardware, and interfacing window of hardware and operating system.

    Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS.

    Attention: Do not power off or restart your computer during the BIOS flashing process, which will cause serious damage and improper functioning of your computer.

  • Note: This BIOS creates an AHCI SATA Controller Mode selection to allow for the installation of the Linux operating system. This BIOS is NOT intended for use with machines running a Windows operation system.
    No official support is provided for this BIOS. The user assumes the risk of any performance degradation associated with the use of this BIOS.


Summary of Changes

Version 0NCN27S2

  1. Creates an AHCI SATA Controller Mode selection to allow for the installation of the Linux operating system.

Downloading the package

  1. Click the file link to download the file from the web page.
  2. When prompted, select a drive and directory in which to save the downloaded file.

Install the package in Windows

  1. Locate the file 0ncn27s2.exe that has been downloaded.
  2. Double click the 0ncn27s2.exe icon.
  3. Follow wizard UI by making sure what BIOS to flash and flash on what platform.
  4. Finally press Install & Finish to start flashing. During the process, you are advised not to turn off the computer.
  5. When the update finishes, the computer will automatically reboot for the changes to take effect.
此資訊是否對您有幫助?

Your feedback helps to improve the overall experience

Last Modified Date: 17 Feb 2020

原始發布日期: 27 Oct 2016

文件ID: DS119360

回饋