BIOS for Windows 10 (64-bit) - ideacentre AIO 730S-24IKB
Available Drivers
BIOS for Windows 10 (64-bit) - ideacentre AIO 730S-24IKB
Windows 10 (64-bit)
Description
This package provides BIOS and is supported on ideacentre AIO 730S-24IKB and running the following Operating Systems: Windows 10 (64-bit)
What's More
Warning:
- Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer.
- During the update, your computer will restart and you will briefly see a black screen.
Supported Systems
- ideacentre AIO 730S-24IKB
Supported Operating Systems
- Windows 10 64-bit
Flash Under Operating System
- Please make note of any settings you have changed in the BIOS Setup utility. They may have to be re-entered after updating the BIOS.
- Click on the Start button and type cmd.exe? Right-click on the cmd.exe application and select run as administrator to open the Command Prompt with Administrator privilege.
- In the "Command Prompt" window, change to the directory where the above files were extracted. The command to go to the location is "cd C:\SWTOOLS\FLASH\O3WJYnnUSA", where "nn" represents the two digit flash level.
- Enter the command "flash.cmd" and press the Enter key to start the flashing process.
- You may first see a confirmation prompt "Proceed with BIOS update now?". Click "Yes" to continue.
- You will see the prompt "Would you like to update the Serial Number?". Input "n" and press Enter.
- Then you will see the prompt "Would you like to update the Machine Type and Model?". Input "n" and press Enter again. Then the BIOS update process will start.
- The update may take up to 2 minutes. Do not power off or restart the system during this procedure! After the Windows process ends, the system will automatically reboot to continue the flash process.
- After the system reboots, the BIOS update process will continue with a simple graphic UI. When the BIOS update process ends, the system will reboot automatically.
- The BIOS update process ends with above nine steps.
Notes: You may see a POST error "0162: Setup data integrity check failure" after step 9.Press F1 to enter BIOS Setup Utility, and then press F10 to save your settings.
Your feedback helps to improve the overall experience
Last Modified Date: 26 Mar 2020
Original Publish Date: 03 Apr 2018
Document ID: DS503009