Please note: This website includes an accessibility system. Press Control-F11 to adjust the website to the visually impaired who are using a screen reader; Press Control-F10 to open an accessibility menu.

End of Development Support

This product is no longer being actively supported by development (End of Development Support) and no further software updates will be provided. Any software or support resources provided by Lenovo are made available “AS IS” and without warranties of any kind, express or implied. Products still covered under the Lenovo Limited Warranty will be covered for repair.

BIOS for Windows 10 (64-bit) - ideacentre 620S-03IKL

BIOS for Windows 10 (64-bit) - ideacentre 620S-03IKL

Available Drivers
File name
Size
Version
Operating System
Release Date
Severity
Options

BIOS for Windows 10 (64-bit) - ideacentre 620S-03IKL

5.315 MB
O3GKT22A

Windows 10 (64-bit)

15 Apr 2019
Recommended

BIOS

o3gjy22usa.exe

5.3 MB
O3GKT22A

Windows 10 (64-bit)

15 Apr 2019
Recommended

BIOS ReadMe

o3gjy22usa.txt

15.2 KB
O3GKT22A

Windows 10 (64-bit)

15 Apr 2019
Recommended

Description

This package provides BIOS and is supported on ideacentre 620S-03IKL and running the following Operating Systems: Windows 10 (64-bit)

What's More

Supported Systems

  • ideacentre 620S-03IKL

Supported Operating Systems

  • Windows 10 64-bit

Flash Under Operating System

  1. Please make note of any settings you have changed in the BIOS Setup utility. They may have to be re-entered after updating the BIOS.
  2. Click on the Start button and type cmd.exe? Right-click on the cmd.exe application and select run as administrator? to open the Command Prompt? with Administrator privilege.
  3. In the "Command Prompt" window, change to the directory where the above files were extracted. The command to go to the location is "cd C:\SWTOOLS\FLASH\O3GJYnnUSA", where "nn" represents the two digit flash level.
  4. Enter the command "flash.cmd" and press the Enter key to start the flashing process.
  5. You may first see a confirmation prompt "Proceed with BIOS update now?". Click "Yes" to continue.
  6. You will see the prompt "Would you like to update the Serial Number?". Input "n" and press Enter.
  7. Then you will see the prompt "Would you like to update the Machine Type and Model?". Input "n" and press Enter again. Then the BIOS update process will start.
  8. The update may take up to 2 minutes. Do not power off or restart the system during this procedure! After the Windows process ends, the system will automatically reboot to continue the flash process.
  9. After the system reboots, the BIOS update process will continue with a simple graphic UI. When the BIOS update process ends, the system will reboot automatically.
  10. The BIOS update process ends with above nine steps.

Notes: You may see a POST error "0162: Setup data integrity check failure" after step 9.Press F1 to enter BIOS Setup Utility, and then press F10 to save your settings.

Was this information helpful?

Your feedback helps to improve the overall experience

Last Modified Date: 05 Mar 2020

Original Publish Date: 14 Aug 2017

Document ID: DS500399

Feedback