BIOS for Windows 10 (64-bit) - ideacentre 510S-08ISH
Available Drivers
BIOS for Windows 10 (64-bit) - ideacentre 510S-08ISH
Windows 10 (64-bit)
Description
This package provides BIOS and is supported on ideacentre 510S-08ISH and running the following Operating Systems: Windows 10 (64-bit)
What's More
- ideacentre 510S-08ISH
Supported Operating Systems
- Windows 10 (64-bit)
Flash Under Operating System
- Please make note of any settings you have changed in the BIOS Setup utility. They may have to be re-entered after updating the BIOS.
- Run the application "O2PJYnnUSA.exe" with Administrator privilege to start flash process.
- You may first see a confirmation prompt "Proceed with BIOS update now?". Click "Yes" to continue.
- You will see the prompt "Would you like to update the Serial Number?". Input "n" and press Enter.
- Then you will see the prompt "Would you like to update the Machine Type and Model?". Input "n" and press Enter again. Then the BIOS update process will start.
- Update may take up to 2 minutes. Do not power off or restart the system during this procedure! After the Windows update process ends, the system will automatically reboot to continue the flash process.
- After the system reboots, the BIOS update process will continue with a simple graphic UI. When the BIOS update process ends, the system will reboot automatically.
- You may see a POST error "0162: Setup data integrity check failure" after reboot. It is a normal behavior. Press F1 to enter BIOS Setup Utility, and then press F10 to save your settings.
- The BIOS update process ends with above eight steps.
Your feedback helps to improve the overall experience
Last Modified Date: 22 Apr 2019
Original Publish Date: 26 Oct 2016
Document ID: DS113047