Atmel Touch Debug Port Driver for Windows 8.1 (32-bit) - ThinkPad Tablet 2

• Microsoft Windows 8.1 32-bit

This package installs the software (Atmel Touch Debug Port Driver) to enable the following device.

	Supported ThinkPad Systems
	Supported Operating System
	Summary of Changes
	Installation Instruction
	Determining which Version is Installed

• ThinkPad Tablet 2

Where:

• [Important] Important update
• (New) New function or enhancement
• (Fix) Correction to existing function

Version <15.16.38.615>

• (New) Added a note about software dependencies at INSTALLATION INSTRUCTIONS section in this README.
• (New) Initial release for ThinkPad Tablet 2.

Notes:

• If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.
• Intel Platform driver GEHP03WW or higher version must be installed first before installing this driver.

This section assumes to use Internet Explorer and Windows Explorer.

[Downloading file]

1. Select the underlined file name. Once this is done, some pop-up windows will appear.
2. Follow the instructions on the screen.
3. In the window to choose Run or Save, click Save.
4. Choose the folder you would like to download the file to and click Save.
   A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Extracting file]

5. Make sure to be logged on with an administrator account.
6. Locate the folder where the file was downloaded.
7. Locate the file that was downloaded and double-click it.
8. Follow the instructions on the screen.
9. In the Select Destination Location window, click Next. If you would like to select a different folder, click Browse.
10. In the Ready to Install window, click Install. All the necessary files will be extracted to the folder selected in the step 9.

[Installing files]

11. Make sure the checkbox next to "Install ..... now" is checked and click Finish.
12. Follow the instructions on the screen to complete installation and restart the computer.

Finally delete the file saved in the step 4.

This is for system administrators' use only.

1. Refer to the Manual Install section, and download and extract the file.
2. In the step 11 of the Installing files section, uncheck the checkbox next
   to "Install ..... now", and then click Finish to cancel installation.
3. At the command line, execute Install_Debug_Port.bat.
   Example: [Path where the files were extracted]\Install_Debug_Port

[Mouse and Keyboard]

1. Hold down the Windows logo key and press X to open a menu at the lower-left area of the screen.
2. Select Device Manager from the menu.
3. Double-click the Hardware Patch Driver Class category.
4. Double-click maxTouch I2C Boot Bridge Peripheral Driver.
5. Select the Driver tab.
6. Check Driver Version.

[Touch]

1. Press the Windows logo button to display the Start screen.
2. Swipe in from the bottom edge of the touchscreen to display the App bar.
3. Select All Apps.
4. Select Control Panel.
5. Select System and Security.
6. Select Device Manager in the System section.
7. Double-tap the Hardware Patch Driver Class category.
8. Double-tap maxTouch I2C Boot Bridge Peripheral Driver.
9. Select the Driver tab.
10. Check Driver Version.