BIOS for Winows 10 (64-bit) - ideacentre AIO 510-22ISH, AIO 510-23ISH

Notes about the BIOS Version of the BIOS package

1. The BIOS package supports 2 generations of Intel CPU (Skylake and Kabylake) with two versions of BIOS.
2. The BIOS package can detect what kind of CPU you installed in the system and BIOS will be updated accordingly, you may check BIOS version in BIOS Setup after BIOS update completed.
3. The steps to check BIOS version in BIOS setup

1.  Power On the unit
2.  Press “F1”during BIOS PSOT to enter BIOS Setup
3.  Check the region as marked yellow below
   1. KTxxA --> Skylake SKUs
   2. KTxxA --> Kabylake SKUs

Flash Under Operating System

1. Please make note of any settings you have changed in the BIOS  Setup utility. They may have to be re-entered after updating the BIOS.
2. Run the application "O31JYnnUSA.exe" with Administrator privilege to start flash process.
3. You may first see a confirmation prompt "Proceed with BIOS update now?". Click "Yes" to continue.
4. You will see the prompt "Would you like to update the Serial Number?". Input "n" and press Enter.
5. Then you will see the prompt "Would you like to update the Machine Type and Model?". Input "n" and press Enter again. Then the BIOS update process will start.
6. Update may take up to 2 minutes. Do not power off or restart the system during this procedure! After Windows update process ends, the system will automatically reboot to continue the flash process.
7. After the system reboots, the BIOS update process will continue with a graphic UI. When the BIOS update process ends, the system will reboot automatically.
8. The BIOS update process ends with above seven steps.