Observera: Denna webbplats innehåller ett tillgänglighetssystem. Tryck på Control-F11 för att anpassa webbplatsen till synskadade som använder en skärmläsare; Tryck på Control-F10 för att öppna en tillgänglighetsmeny.

How to perform battery gauge reset using Energy Management - ideapad

Steps and instructions to perform battery gauge reset using Energy Management - ideapad

Identifiera din enhet
För att vara säker på att detta innehåll gäller för den enhet du behöver information om, ange ditt serienummer eller välj din produkt. Eller Sök Produktnamn

Steps and instructions to perform battery gauge reset using Energy Management - ideapad

Description

This article provides information on how to perform battery reset under Energy Management. The screenshots may differ between various software versions.

Applicable Brands

ideapad

System Is Configured With

Lenovo Energy Management (7.0, 8.0)

Solution

  1. Run Energy Management, then click the icon as shown below.

    Energy Management
  2. Click Start.

    Start
  3. Close all running programs and connect the AC adapter, then click Continue.

    Continue button
  4. The whole process may take several hours. Do not use the computer during this period. Do not cancel while the process is running. Wait until the process is completed.

    Process

Note: To manually calibrate the battery, charge the battery to 100%. Allow the battery to drain down to 5% before charging again.


Alias-Id:IG20100308-004
Dokument-ID:HT069480
Ursprungligt publiceringsdatum:09/22/2016
Senast ändrad den:02/04/2025