BIOS Update for Windows 10 (64-bit) - 120S-11IAP Winbook, 120S-14IAP Winbook
Tillgängliga drivrutiner
BIOS Update for Windows 10 (64-bit) - 120S-11IAP Winbook, 120S-14IAP Winbook
Windows 10 (64-bit)
Beskrivning
This package provides BIOS Update and is supported on 120S-11IAP Winbook, 120S-14IAP Winbook and running the following Operating Systems: Windows 10 (64-bit)
Kompatibla enheter
- 120S-11IAP Winbook, 120S-14IAP Winbook
Kompatibla operativsystem
- Microsoft Windows 10 (64-bit)
Vad mer
Important Information
- BIOS, an abbreviation of Basic Input/Output System, is integrated into ROM chip on main board, which contains the basic input/output program, system configuration information, system startup self-check and pre-setup programs. BIOS provides the most basic low-level hardware operations; it is the connection between software and hardware, and interfacing window of hardware and operating system.
- Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS.
If you have updated the BIOS version to 6GCN29WW, It will not be able to back flash to any previous version.
- Attention: Do not power off or restart your computer during the BIOS flashing process, which will cause serious damage and improper functioning of your computer.
Summary of Changes
Latest Version BIOS fixed all merged issues from previous.
Version 6GCN32WW
BIOS Notification:
- Enhencement to address security vulnerability CVE-2018-12179,CVE-2018-12182,CVE-2018-12181,CVE-2019-0120
- Update TXE to 3.1.65.2318
- Update Microcode to m_03_506c9_00000038
Downloading the package
- Click the file link to download the file from the web page.
- When prompted, select a drive and directory in which to save the downloaded file.
Install the package in Windows
- Locate the file 6gcn32ww.exe that has been downloaded.
- Plug in AC adaptor and make sure the battery volume is over 30%.
- Run 6gcn32ww.exe as Administrator.
- Follow wizard UI by making sure what BIOS to flash and flash on what platform.
- Finally, press Install & Finish to start flashing. During the process, you are advised not to turn off the computer.
- When the update finishes, the computer will automatically reboot for the changes to take effect.
Din feedback bidrar till att förbättra den övergripande upplevelsen
Senast ändrad den: 27 Jun 2019
Ursprungligt publiceringsdatum: 27 Jul 2017
Dokument-ID: DS500122