Application Installation procedure for Lenovo ThinkPad WiGig Wireless Module and Dock Driver - ThinkPad
Application Installation procedure for Lenovo ThinkPad WiGig Wireless Module and Dock Driver - ThinkPad
Application Installation procedure for Lenovo ThinkPad WiGig Wireless Module and Dock Driver - ThinkPad
Symptom
This document is the Application Installation procedure for the ThinkPad WiGig WLAN Module and Dock Device Drivers for standalone use or SCCM/MDT deployment.
Applicable Brands
ThinkPad
Applicable Systems
- ThinkPad X1 Carbon 3rd Gen (Machine types: 20FB, 20FC)
- ThinkPad X1 Yoga
- ThinkPad Yoga 260
- ThinkPad X260
- ThinkPad T460
- ThinkPad T460s
- ThinkPad WiGig Dock (40A6)
System Is Configured With
- Intel WiGig Wireless Card (Intel Tri-Band Wireless AC 18260)
- ThinkPad WiGig Dock (40A6)
- Specific model ThinkPad notebook computers with WiGig Wireless Module installed and pre-configured at time of computer manufacturing. Note: These models come pre-configured from Lenovo manufacturing facility with the Intel WiGig 802.11ad Wireless Card. The Wireless Module and antenna are built into the system at the time of manufacturing and cannot be added later.
Operating System
Microsoft Windows 10
Limitations
The general WiGig overview is located at the following URL:
Overview for ThinkPad WiGig Dock (40A60045WW)
Solution
The WiGig Wireless Module Driver and Wireless Dock application is located at the following URL:
Intel Wireless Gigabit Software
The WiGig Ethernet and audio drivers are available at the following URL:
ThinkPad WiGig Dock - Overview and Service Parts
Download all three drivers and extract them to the default file locations.
Install the Intel Wireless Gigabit Software application first, then Ethernet, and then audio driver.
The audio driver will require a reboot of the system.
- For standalone install, navigate to the extracted file location and run setup for each driver.
- For MDT and SCCM, a package or application install must be configured within MDT or SCCM for each driver. Each driver can be installed silently via the SETUP.EXE –S switch. The WiGig Module and Intel Wireless Dock application must be installed first as the setup will detect the presence of the WiGig wireless module.
After all drivers are installed, launch the WiGig Wireless Dock application and follow the prompts on the attached external monitor to pair the device.
Additional Information
If the drivers are installed correctly, the following Device Manager entries will be displayed:
Related Articles
Ваші відгуки допомагають покращити загальний досвід
