Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Hard drive Active Protection: How to test the accelerometer to ensure it is working properly - ThinkPad General

      There is no direct way upon normal bootup to know if the accelerometer is functioning properly since it is not tested at every bootup.

      Affected configurations
      All ThinkPad R50 and ThinkPad T41 computer systems equipped with the Active Hard Drive Protection System.

      There are three ways to check the accelerometer.

      1. Boot the ThinkPad system into diagnostics mode by:
        • Pressing the Esc key when the IBM logo screen appears during boot.
        • Diagnostic is run and a POST error will appear if the diagnostic fails.
      2. Via pressing the blue Access IBM button on the keyboard during boot and choosing the Run Diagnostics option. Once PC Doctor for DOS starts, go the to the Other Devices option under the Diagnostics menu and run the hard drive Active Protection Test.
      3. Bring up the Hard Dive Protection Interface from Control Panel or the Task Tray icon once the operating system is booted up. You can then go to the Real-time Status tab and the ThinkPad icon should move when the ThinkPad is moved.


      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-53248
      • Document ID: HT037225
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo