• -

      Power supply installation movie - ThinkCentre A52 (type 8154, 8161, 8162, 8164, 8165) / M52 (type 8111, 8211, 8212, 8213, 8214)

      Back Power supply installation movie - ThinkCentre A52 (type 8154, 8161, 8162, 8164, 8165) / M52 (type 8111, 8211, 8212, 8213, 8214) - Videos

      Movie player help

      Power supply removal movie

       

      Text of the audio portion of this movie

      To install the power supply:

      1. Position the power supply in the system and slide it towards the rear.
      2. Secure the power supply to the rear chassis with the four screws.
      3. Connect the power cable to the disk drive and route the cables through the cable clamp, then push the drive back into the bay until secured by the latch.
      4. Connect the following cables:
        1. P6 optical drive
        2. P7 diskette drive
        3. P2 system board
        4. P1 system board
      5. Return the system to the operational position. Carefully rotate the drive bay assembly to the closed position, ensuring the cables are properly routed in the bay to avoid damage.
      6. Close the top cover. Rotate the cover down until secured by the latches.
      Additional information

       

      ThinkCentre movie index
      Detailed power supply installation and removal instructions

      Full service video CD available from http://www.pc.ibm.com/training.

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.