• -

      Memory (DIMM) installation movie - ThinkCentre A51, A52, M52, M52e

      Back Memory (DIMM) installation movie - ThinkCentre A51, A52, M52, M52e - Videos

      Movie player help

      Memory (DIMM) removal movie

       

      Text of the audio portion of this movie

      To install a DIMM:

      1. Ensure that the retention latches are open and then insert the DIMM straight into the slot, pressing down on both corners at the same time until secured by the latches.
      2. Use the same procedure to install any remaining DIMMs.
      3. Install the side cover. Position the bottom of the cover over the edge of the chassis.
      4. Rotate the cover down while aligning the tabs on the cover with the slots in the chassis.
      5. Slide the cover forward until it is secured in place. Here is a closer look at the cover tab and a slot in the chassis.
      6. Return the system to its operational position.
      Additional information

       

      ThinkCentre movie index
      Detailed memory installation and removal instructions for ThinkCentre A51, A52, M52, M52e systems

      Full service video CD available from http://www.pc.ibm.com/training.

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.