Please note: This website includes an accessibility system. Press Control-F11 to adjust the website to the visually impaired who are using a screen reader; Press Control-F10 to open an accessibility menu.

Power button LED assembly installation movie - ThinkCentre A52 (type 8154, 8161, 8162, 8164, 8165) / M52 (type 8111, 8211, 8212, 8213, 8214)

Power button LED assembly installation movie - ThinkCentre A52 (type 8154, 8161, 8162, 8164, 8165) / M52 (type 8111, 8211, 8212, 8213, 8214)

Power button LED assembly installation movie - ThinkCentre A52 (type 8154, 8161, 8162, 8164, 8165) / M52 (type 8111, 8211, 8212, 8213, 8214)

Movie player help

Power button LED assembly removal movie

 

Text of the audio portion of this movie

To install the power button LED assembly:

  1. Position the hinge tab through the slot in the chassis and rotate the assembly until secured by the latching tab.
  2. Route the cable along the top of the fan, through the cable clamp and connect it to the system board.
  3. Install the front fan baffle. Position the slots in the fan baffle over the tabs in the chassis and slide down until secured by the detents.
  4. Return the system to the operational position. Carefully rotate the drive bay assembly to the closed position, ensuring the cables are properly routed in the bay to avoid damage.
  5. Install the bezel. Using the three tabs along the top and the two tabs on the sides for alignment.
  6. Position the bezel on the front of the chassis and press in on the top until it latches in place. Here is a closer look at a side and top tab.
  7. Close the top cover. Rotate the cover down until secured by the latches.

 

Additional information

 

ThinkCentre movie index

Full service video CD available from http://www.pc.ibm.com/training.

Purchase parts online

Alias Id:MIGR-62205
Document ID:PD009486
Original Publish Date:01/04/2011
Last Modified Date:09/25/2018