• -

      Backup battery installation movie - ThinkPad Z60m, Z61e, Z61m, Z61p

      Back Backup battery installation movie - ThinkPad Z60m, Z61e, Z61m, Z61p - Videos

      Movie player help

      Backup battery removal movie

      Text of the audio portion of this movie
      1. Install the backup battery:
        1. Connect the cable to the system board.
        2. Position the battery on the base and press until it is secured by the double-stick tape.
      2. Install the keyboard
        1. Position the keyboard over the system.
        2. Connect the cable to the system board.
        3. Align the keyboard in the bezel.
        4. Close the cover and turn the system over.
        5. Secure with the single screw.
      3. Install the palm rest:
        1. Connect the finger print reader UltraNav pad cable.
        2. Position the palm rest over the base.
        3. Press down along the edges to seat the latching tabs.
        4. Close the display and turn the system over.
        5. Secure with the four screws.
      4. Install the battery pack:
        1. Position the battery pack into the machine using the side rails as a guide.
        2. Push in the battery pack until it is secured by the latch.
        3. Slide the latch to the lock position.
      Additional information

      ThinkPad movie index

      Full service video CD available from http://www.pc.ibm.com/training.

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.