Battery pack removal and installation - ThinkPad X301

Applicable Countries/Regions
Parts Information
Battery pack removal

Unlock the battery latch [1]. Holding the battery lock lever in the unlocked position [2], remove the battery pack in the direction shown by arrow [3]and [4].

Note: Large battery used in some models only has one battery latch.

Please perform the following step as shown in the picture below.

Battery removal step 1, 2, 3 and 4

Battery pack installation

When installing: Install the battery pack along the slide rails of the slot. Then make sure that the battery release lever is in the locked position.

Did this work for you? let us know

  • Alias ID: HT038484
  • Document ID: PD015586
  • Last Updated :17 Jun 2014
  • © 2015 Lenovo