Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      LCD rear cover and wireless antenna cables removal and installation - ThinkPad X200, X200s, X200si, X201, X201i, X201s

       

      Applicable Countries/Regions
      Worldwide
      Parts Information

      For access, remove these FRUs in order:

      12.1-in. WXGA LCD rear cover and wireless antenna cables removal and installation

      Please perform the following steps as shown in the pictures below.

      12.1-in. WXGA LCD rear cover removal step 1
      12.1-in. WXGA LCD rear cover removal step 1 screw description

      12.1-in. WXGA LCD rear cover removal step 2

      In step [3], release the antenna cables from the cable guides of the rear cover.

      12.1-in. WXGA LCD rear cover removal step 3 and 4

      12.1-in. WXGA LCD rear cover removal step 5

      Note: Wireless antennas are secured with double-faced adhesive tapes.

      When installing: When you attache the antenna cables, do as follows.

      12.1-in. WXGA LCD rear cover installation step 1

      Cable routing: Place the antenna assembly as shown in this figure.

      [a] Wireless WAN antenna, AUX (blue)
      [b] Wireless LAN antenna, AUX (black)
      [c] Wireless USB antenna (yellow)
      [d] MIMO antenna (white)
      [e] Wireless LAN antenna, MAIN (gray)
      [f] Wireless WAN antenna, MAIN (red)

      12.1-in. WXGA LCD model antenna cable routing

      Attention: As you route the antenna cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

      12.1-in. WXGA+ LCD model LCD rear cover and wireless antenna cables removal and installation

      In step [1], release the antenna cables from the cable guides of the rear cover.

      12.1-in. WXGA+ LCD rear cover removal step 1

      Note: Wireless antennas are secured with double-faced adhesive tapes.

      Cable routing: Place the antenna assembly as shown in this figure.

      [a] Wireless LAN antenna, AUX (black)
      [b] Wireless USB antenna (yellow)
      [c] MIMO antenna (white)
      [d] Wireless LAN antenna, MAIN (gray)

      12.1-in. WXGA+ LCD model antenna cable routing

      Attention: As you route the antenna cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

       

      Search

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: HT045780
      • Document ID: PD015585
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo