Removal steps of keyboard
Note: Your models may look slightly different from the illustration above.
When installing: Make sure the screws have been fastened to secure the keyboard.
||M2 × 6 mm, wafer-head, nylon-coated (2)
||0.181 Nm (1.85 kgfcm)
Installation steps of keyboard
To install the keyboard, do the following:
- Attach the connectors.
- Attach the keyboard so that the keyboard edges are under the frame.
- To make sure that the front side of the keyboard is housed firmly, gently press the keys with your thumbs and try to slide the keyboard toward you.
- Secure the keyboard by tightening the screws from the bottom side of the computer.