LCD Unit Removal and Installation - ThinkPad Edge E120, E125

LCD unit removal and installation

In step [1] , release the antenna cables from the cable guides.

Please perform the following steps as shown in the pictures below.

When installing:

  • Make sure that the cables are attached to the cable guides firmly.
  • When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

Step Screw (quantity) Color Torque
3 M2.5 × 5 mm, wafer-head, nylon-coated (4) Black 0.392 Nm (4 kgfcm)


When installing: Make sure that the connector is attached firmly to the system board.


Purchase parts online
Did this work for you? let us know

  • Alias ID:
  • Document ID: PD015183
  • Last Updated :17 Jun 2014
  • © 2015 Lenovo