• -

      Top Case Assembly - ThinkPad Edge E120, E125

      Top case assembly removal and installation

      For access, remove these FRUs in order:

      Please perform the following steps as shown in the pictures below.

      Step Screw (quantity) Color Torque
      1
      • Front side: M2 × 5 mm, wafer-head, nylon-coated (2)
      • Rear side: M2.5 × 5 mm, wafer-head, nylon-coated (2)
      Black 0.181 Nm (1.85 kgfcm)

      Step Screw (quantity) Color Torque
      2 M2 × 5 mm, wafer-head, nylon-coated (3) Black 0.181 Nm (1.85 kgfcm)

      In step [8] , push the top case assembly out from the frame as shown in the following figure by using a plastic pry tool, and remove the top case assembly in the direction shown by the arrow

      When installing: Make sure that all the projections of the top case assembly are attached firmly to the guide holes of the base cover.

       

      Purchase parts online

       

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID:
      • Document ID: PD015170
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo