|Wireless LAN antenna assembly, wireless WAN antenna assembly, and LCD rear cover assembly removal instruction|
For access, remove these FRUs in order:
Release the antenna cables from the cable guides of the LCD rear cover assembly as shown in the pictures below:
Cable routing: When you install the antenna assembly, route the cables as shown in the following figure. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
[a] Wireless LAN MAIN antenna (gray)
[b] Wireless WAN MAIN antenna (red)
[c] Wireless WAN AUX antenna (blue)
[d] Wireless LAN AUX antenna (black)
Note: Some models might have a third white cable for wireless LAN.