Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Keyboard removal and installation - ThinkPad Edge E320, E325

      Keyboard removal and installation instruction

      For access, remove these FRUs in order:

      Please perform the following steps as shown in the pictures below:

      Screw (quantity)
      [1] M2 × 5 mm, flat-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm)




      There are two small hooks on each of the two keyboard flat flex cables. When installing the keyboard, make sure that the two hooks on each flat flex cable are completely inserted into the corresponding ZIF connector.


      When installing the keyboard, do the following:
      1. Attach the keyboard connector.
      2. Attach the keyboard so that the keyboard edge is under the frame as shown in the following figure.

      3. To make sure that the keyboard is housed firmly, gently press the keys with your palms and slightly slide the keyboard toward you until it snaps into position.

      4. Secure the keyboard by tightening the screws from the bottom side of the computer.







      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID:
      • Document ID: PD015157
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo