Unsupported Browser Detected: Dear user, the browser you’re currently using is not supported by this website. Please click here for more information about the browsers we support and how to obtain them.

Battery pack removal and installation - ThinkPad Edge E320, E325

Battery pack removal and installation instruction

Important notice for replacing a battery pack:

  • Lenovo ThinkVantage Toolbox has an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective.
  • The only exception to this is if the battery pack is physically damaged or a customer is reporting a possible safety issue.
  • If Lenovo ThinkVantage Toolbox is not installed in the computer, the customer should download this program before a non-physically damaged battery pack


Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.

Please perform the following steps as shown in the pictures below.

Slide the left battery latch to the unlocked position [1] , and then hold the right battery latch to the unlocked position until you remove the battery [2] .



When installing:
Install the battery pack in the slot. Make sure that the left battery latch is in the locked position.

  • Alias ID:
  • Document ID: PD015149
  • Last Updated :17 Jun 2014
  • © 2015 Lenovo