• -

      Hard disk drive and solid state drive Assembly - ThinkPad X1

      Attention:
      • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
      • Before removing the drive, have the user make a backup copy of all the information on it if possible.
      • Never remove the drive while the system is operating or is in suspend mode.

      Note: Loosen the screw [1] , but do not remove it.

      baterrypack_x1

      Step Screw (quantity) Color
      Torque
      2 M2 × 8 mm (1)
      Black 0.181 Nm (1.85 kgfcm)

       

      hardiskdrive1

      For a hard disk drive with rubber rails:

      harddiskdrive2

      For a solid state drive with spacers:

      harddiskdrive3

      When installing:
      Make sure that the hard disk drive rubber rails or solid state drive spacers are attached firmly.

       

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID:
      • Document ID: PD015079
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo