Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Battery pack removal and installation - ThinkPad X300

      View battery removal movie
      View battery installation movie

      Removal steps of battery pack

      1. Turn off the computer, or enter hibernation mode. Then disconnect the AC adapter and all cables from the computer.
        Note: If you are using a PC Card, the computer may not be able to enter hibernation mode. If this happens, turn off the computer.
      2. Close the computer display, and turn the computer over.
      3. Unlock the battery latch (1). Holding the battery lock lever in the unlocked position (2), remove the battery pack in the direction shown by arrow (3) and (4).

      Battery

      Note: Large battery used in some models only has one battery latch.

      When installing: Install the battery pack along the slide rails of the slot. Then make sure that the battery release lever is in the locked position.

      Removal steps of second battery or travel cover

      Second Battery1

      StepScrew (quantity)ColorTorque
      1M2 x 6mm, bind-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

      Second Battery2

       

       

       

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-69344
      • Document ID: PD013530
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo