Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Palm rest or palm rest with fingerprint reader removal and installation - ThinkPad X300

      Removing the palm rest

      For access, remove these FRUs in order:

      1. Remove battery.
      2. Remove keyboard.

      Note: In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader.

      palm rest1

      StepScrew (quantity)ColorTorque
      2M2 × 3 mm, small-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

      palm rest2

      StepScrew (quantity)ColorTorque
      2M2 × 6 mm, bind-head, nylon-coated (4)Black0.167 Nm(1.7 kgfcm)
      3M2 × 4 mm, bind-head, nylon-coated (4)Black0.167 Nm(1.7 kgfcm)
      4M2, shoulder, nylon-coated (2)Black0.167 Nm(1.7 kgfcm)

      palm rest3

      palm rest4

      Purchase parts online


      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-69435
      • Document ID: PD011375
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo