L192 Wide Flat Panel Monitor - Overview

ThinkVision L192 Wide Monitor (6920)


ThinkVision L192 Wide Monitor (6920)
Machine Type - Models: 6920-AB1, 6920-AN1, 6920-AJ1

Features and specifications
Monitor Size 19.0 inch (481 mm)
Optimum Resolution 1440 x 900
Maximum Resolution 1440 x 900
Aspect Ratio 16 x 10
Pixel pitch 0.285 mm
Brightness (typical) 300 cd/m2
Contrast ratio (typical) 800 : 1
Colors > 16.0 million
Horizontal viewing angle 160 degrees (at 10:1 contrast ratio)
176 degrees (at 5:1 contrast ratio)
Vertical viewing angle 160 degrees (at 10:1 contrast ratio)
176 degrees (at 5:1 contrast ratio)
Response time (typical) 5 ms
Viewable area height 256.5 mm
Viewable area width 410.4 mm
Video input 15-pin D
Preset display modes 19
User-defined display modes 20
On-Screen Display menu languages English, French, German, Spanish, Italian, Japanese, Simplified Chinese
Tilt 5 degrees forward
20 degrees backward
Bezel width 25 mm
VESA mount 100 mm
Composite sync Yes
Power supply Universal
Power cord 1.8 m
ISO 13406 Part 2 capable Yes
ISO 13406-2 Class II Pixel Defect Yes
VESA DPMS power management capable Yes
JEIDA compliance Yes (6920-AJ1 model only)
FCC B compliance Yes
TCO'99 Environmental Label Yes
MPR-2 emission compliance Yes
EU Directive 2002/95/EC (RoHS) Yes
EU Directive 2002/96/EC (WEEE) Yes

Physical specifications
Height 15.6 inch (395 mm) 18.0 inch (457 mm)
Width 18.2 inch (462 mm) 20.7 inch (527 mm)
Depth 7.6 inch (192 mm) 6.0 inch (152 mm)
Weight 11.4 lb (5.2 kg) 14.9 lb (6.8 kg)

Power requirements
  • Input voltage: 100 to 240 V ac
  • Frequency: 50/60 Hz
  • Power consumption:
    • Maximum: 36 watts
    • Normal use: 35 watts typical
    • VESA standby: <2 watts
    • VESA suspend: <2 watts
    • VESA off: <1 watt
    • Maximum earth leakage current:
      • <3.5 mA at 264 V
      • <0.25 mA at 100 V

Actual power consumption depends on the chosen display mode, the images displayed, and user control settings.

Ambient temperature and relative humidity
ParameterTemperatureRelative humidityAltitude
Operating 0 to 45 deg. C 10 to 80 % 0 to 8,000 ft (2,438 m)
Shipping -20 to 60 deg. C 5 to 95 % 0 to 35,000 ft (10,668 m)
Storage -20 to 60 deg. C 5 to 95 % 0 to 12,000 ft (3,657 m)


Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.

  • One monitor
  • Attached tilt stand
  • Attached 1.8-meter analog video signal cable (15-pin D to 15-pin D)
  • Power cord
  • A 3 -> 2 pin AC adapter (Japan only)
  • A Japanese proof of purchase card (Japan only)
  • A CD containing multilingual user's guide, set-up test pattern, and .INF file
  • Setup guide
  • Safety and warranty information

Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.


Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

  • Announce date: 19 Sep 2006
  • Planned availability date: 29 Sep 2006 (United States and Canada)
  • Planned availability date: 13 Oct 2006 (Latin America, Europe, Middle East and Africa)
  • Planned availability date: 22 Sep 2006 (Asia Pacific)
  • Effective withdrawal date: 28 Dec 2007 (Worldwide)
  • Replaced by ThinkVision L194 19-inch Wide Flat Panel LCD Monitor (4434-HB6)

Hardware compatibility

The display is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:

Maximum resolution 1440 x 900 pixels
Optimum resolution 1440 x 900 pixels
Maximum pixel rate 137 MHz

The monitor supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes:

  • VGA: 640 x 480 at 60, 72, and 75 Hz
  • SVGA: 800 x 600 at 56, 60, 72, and 75 Hz
  • XGA: 1024 x 768 at 60, 70, and 75 Hz
  • SXGA: 1280 x 1024 at 60, 70, 72 and 75 Hz
  • WXGA+: 1440 x 900 at 60 and 75 Hz

This monitor supports the following modes:

  • 640 x 350 at 70 Hz
  • 640 x 480 at 66 Hz
  • 720 x 400 at 70 Hz
  • 1280 x 1024 at 76 Hz

Note: National language support is a function of the video adapter in the system unit and the application or support software.

Preset Display Modes
(H x V Pixels)
Incoming video refresh rate
640 x 350 70 Hz NI
640 x 480 60 Hz NI
66 Hz NI
72 Hz NI
75 Hz NI
720 x 400 70 Hz NI
800 x 600 60 Hz NI
72 Hz NI
75 Hz NI
1024 x 768 60 Hz NI
70 Hz NI
75 Hz NI
1280 x 1024 60 Hz NI
70 Hz NI
72 Hz NI
75 Hz NI
76 Hz NI
1440 x 900 ** 60 Hz NI** (Optimum Display Mode)
1440 x 900 75 Hz NI

Note (**): This is the optimum display mode for the best displayed image. Reduced image quality may result if used in other modes due to the image scaling limitations of LCD monitor technology.

  • User modes: 17

The preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control.

Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz.

It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments.

Software requirements
  • Microsoft Windows Me
  • Microsoft Windows 2000
  • Microsoft Windows XP

Ergonomics/Emissions/Environmental/Compatibility Approvals
  • TCO'99 Environmental Label
  • ISO/DIS 13406 Part 2
  • Software: Microsoft 2000/XP
  • EU Directive 2002/96/EC - WEEE
  • EU Directive 2002/95/EC - RoHS

Agency approvals - EMI/Safety

UL (U.S.), CSA (Canada), IEC950 CB Report, NEMKO (Norway), SEMKO, DEMKO (Denmark), FIMKO (Finland), TUV (Germany), TUV-S (Argentina), CCC (China), NOM (Mexico), SASO (Saudi Arabia), GOST (Russia), PSB (Singapore), GREEN MARK (Taiwan), JEITA (Japan), FCC B (U.S.), IC (Canada), CE (Europe), MIC (Korea), VCCI Class B (Japan), BSMI (Taiwan), South Africa, Australia, New Zealand, Jordan

  • Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
  • Horizontal and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
  • Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
  • The number of colors shown in any display mode (up to a maximum of 16.2 million) is not limited by the monitor, but depends on the capabilities of the video adapter in the system unit.
  • This monitor provides FCC class B - residential installation - compliance in all display modes.
  • Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
  • Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
  • Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
  • A 19.0-inch Wide TFT monitor has nearly 4.0 million subpixel transistors laid over an area exceeding 162 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. This monitor meets the ISO 13406-2 Class II Pixel Defect standard.
  • The Auto-Setup "test pattern" can be used with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, Windows XP, and DOS 7.0 only.

Additional Product information
Configuration files - Relevant files for your product
Service parts - Parts listing for your product
User's guide - Instruction manual for your product
Troubleshooting - Step-by-step instructions for solving common monitor issues
Lenovo ThinkVision Monitors ( www.lenovo.com/thinkvision ) - ThinkVision monitor information
Lenovo Support: Monitors - Reference Guide - A list of monitors
Lenovo Support: Monitor Accessories - Reference Guide - A list of monitor accessories (stands, arms, displayport cables, cable locks, soundbars)
Lenovo Support: DisplayPort Cables - Product and compatibility information for DisplayPort monitor cables
Lenovo Support: Graphic Cards - Reference Guide - A list of graphic cards for desktop and workstation systems
Lenovo Support: Accessories - Reference Guide - A list of accessories for notebook, desktop, workstation, server accessories
www.lenovo.com/accessoriesguide - Additional information on options and accessories, including the Option Compatibility Matrix (OCM)
Personal Systems Reference (PSREF) - Comprehensive information on the features and technical specifications on Lenovo products
Did this work for you? let us know

  • Alias ID: MIGR-65756
  • Document ID: PD010837
  • Last Updated :26 Mar 2014
  • © 2015 Lenovo