Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Structure frame and IEEE 1394 sub card removal and installation - ThinkPad R500

      For access, remove these FRUs in order:

      1. Battery.
      2. Serial Ultrabay Enhanced device.
      3. Hard disk drive cover, hard disk drive, and hard disk rubber rails
      4. Palm rest or palm rest with fingerprint reader.
      5. Keyboard.
      6. PCI Express Mini Card for wireless LAN
      7. Keyboard bezel and speakers
      8. Fan assembly.
      9. LCD assembly.
      10. Base cover and PC Card/ExpressCard (or ExpressCard/Smart Card) bezel assembly.

      Image 1

      StepScrew (quantity)ColorTorque
      1M2 × 3 mm, flat-head, nylon-coated (1)Silver0.167 Nm(1.7 kgfcm)

      Remove the ac power jack cable (a).

      Image 2

      When installing: Make sure the connectors are attached firmly.

      Remove the CPU support plate.

      Image 3

      StepScrew (quantity)ColorTorque
      6M2 × 5 mm, flat-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

      Image 4

      StepScrew (quantity)ColorTorque
      7M2 × 3.5 mm, flat-head, nylon-coated (4)Black0.167 Nm(1.7 kgfcm)
      8M2 × 9.5 mm, pan-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

      When installing: When attaching the system board to the frame, adjust the placement with the small projection (a). Then secure the system board with the screws.

      In step (10), remove the system board and the PC Card/ExpressCard slots assembly from the structure frame together.

      In step (11) and (12), remove IEEE 1394 sub card.

      Image 5

      StepScrew (quantity)ColorTorque
      11M2 × 5 mm, flat-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)


      Purchase parts online


      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71308
      • Document ID: PD010312
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo