Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      LCD unit removal and installation - ThinkPad SL300

      For access, remove:

      1. Battery pack
      2. Hard disk drive (HDD) cover and HDD
      3. DIMM slot cover
      4. PCI Express Mini Card for wireless WAN
      5. Palm rest
      6. PCI Express Mini Card for wireless LAN/WiMAX
      7. Keyboard
      8. Top case sub assembly

      Removal steps of LCD unit

      LCD unit

      StepScrew (quantity)ColorTorque
      [1]M2 × 3 mm, wafer-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)
      [2]M2 × 5 mm, wafer-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

      LCD unit

      StepScrew (quantity)ColorTorque
      [3]M2 × 5 mm, wafer-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

      In step [4], remove the tapes securing the antenna cables, and release the cables from the cable guides of the base cover [5].

      LCD unit

      LCD unit

      When installing:

      1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
      2. Make sure that the LCD connector is attached firmly.
      Purchase parts online

      Search

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71534
      • Document ID: PD010081
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo