For access, remove these FRUs in order:
- Palm rest or palm rest with fingerprint reader.
- PCI Express Mini Card for wireless LAN
- Keyboard bezel and speakers
- LCD assembly.
- LCD front bezel.
|1||M2.5 × 4 mm, flat-head, nylon-coated (3)||Silver||0.167 Nm(1.7 kgfcm)|
Remove the hinges (a).
|5||M2 × 2.8 mm, flat-head, nylon-coated (4)||Black||0.167 Nm(1.7 kgfcm)|
Cable routing: When you install the LCD panel, make sure that the antenna cables are routed as shown in this figure.
Remove the ALPET sheets (b).
Note: The ALPET sheets are secured with a double-faced adhesive tape.
Remove the LCD cable (c).
When installing: Make sure that the connector is attached firmly.