Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Speaker and base cover assembly removal and installation - IdeaPad S9e and S10e

      For access, remove:

      1. Battery pack
      2. Hard disk drive (HDD) door
      3. Hard disk drive (HDD)
      4. DIMM
      5. Palm rest assembly
      6. PCI Express Mini Card for wireless LAN
      7. Bluetooth daughter card and Bluetooth cable
      8. Keyboard
      9. Keyboard bezel
      10. Fan assembly
      11. LCD assembly

      Removal steps of speaker and base cover assembly

      LCD assembly

      When installing: Route the speaker cables as shown in this figure.

      LCD assembly

      Applying labels to the base cover:

      The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:

      [1] Product label
      [2] Homologation label

      Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.

      [3] Serial number label
      [4] China label or Israel label
      [5] MAC address label
      [6] Windows license label (COA)

      For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.

      For the location of each label, refer the following figure:

      LCD assembly

      Purchase parts online


      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71396
      • Document ID: PD008973
      • Last Updated :26 Mar 2014
      • © 2016 Lenovo