• -

      Hard disk drive (HDD) slot cover, HDD rubber rails and HDD or storage converter and solid state drive (SSD) removal and installation - ThinkPad T410, T410i

      Hard disk drive (HDD) slot cover, HDD rubber rails and HDD or storage converter and solid state drive (SSD) removal and installation steps

       

      Attention:
      • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
      • Before removing the drive, have the user make a backup copy of all the information on it if possible.
      • Never remove the drive while the system is operating or is in suspend mode.

      For access, remove this FRU, in order:

      74691_hdd_ssd_00_view

      StepScrew (quantity)ColorTorque
      1 M3 × 3 mm, wafer-head, nylon-coated (1) Black 0.392 Nm (4.0 kgfcm)

      74691_hdd_ssd_01_view

      For HDD and HDD rubber rails:

      74691_hdd_ssd_02_view

      For SSD and storage converter:

      74691_hdd_ssd_03_view

      When installing: Make sure that the SSD connector or HDD connector is attached firmly.

       

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-74691
      • Document ID: PD005793
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo