Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      LCD unit removal and installation - Thinkpad W700, W700ds, W701, W701ds

      LCD unit removal and installation

      For access, remove these FRUs in order:

      For ThinkPad W700 and W700ds:

      Please perform the following steps as shown in the pictures below.

      migr-71727_lcd.gif

      migr-71727_lcd1.gif

      migr-71727_lcd2.gif

      migr-71727_lcd3.gif

      Step [6a] is only for ThinkPad W700ds.

      migr-71727_lcd4.gif

      When installing: When installing: In ThinkPad W700ds, make sure that the cable connector [6a] is attached firmly.

      migr-71727_lcd5.gif

      When installing:

      1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
      2. Make sure that the LCD connector is attached firmly.

      For ThinkPad W701 and W701ds:

      lcdunit_01.jpg

      lcdunit_02.jpg

      lcdunit_03.jpg

      lcdunit_04.jpg

      lcdunit_05.jpg

      When installing:

      • Make sure that the cable connector [8] is attached firmly.
      • In ThinkPad W701ds, make sure that the cable connector [9a] is attached firmly.

      lcdunit_06.jpg

      When installing:

      1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
      2. Make sure that the LCD connector is attached firmly.


        Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71727
      • Document ID: PD005338
      • Last Updated :03 Dec 2015
      • © 2016 Lenovo