For access, remove these FRUs in order:
In step , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.
|2||M2 × 3 mm, wafer-head, nylon-coated (2)||Black||0.181 Nm (1.85 kgfcm)|
Note: Plug the red cable into the jack labeled MAIN, and the blue cable into the jack labeled AUX on the card.
If the computer you are servicing is a wireless WAN-ready model and does not have the wireless WAN card, route the antenna cables and secure them with a tape as shown in this figure.