Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      LCD assembly removal and installation - ThinkPad X200, X200s, X200si, X201, X201i, X201s

      LCD assembly removal

      For access, remove these FRUs in order:

      Please perform the following steps as shown in the pictures below.

      LCD assembly removal step 1
      LCD assembly screw description

      LCD assembly removal step 2
      LCD assembly step 2 screw description

      Before step [3], strip off the tapes securing the antenna cables, and release the cables from the cable guides of the frame.
      LCD assembly removal step 3
      LCD assembly step 3 screw description

      LCD assembly removal step 4

      LCD assembly installation
      1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
      2. Make sure that the LCD connector is attached firmly.
        LCD assembly installation step 2
      Purchase parts online


      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71238
      • Document ID: PD003714
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo