Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      LCD unit removal and installation - ThinkPad T400s, T410s, T410si

      LCD Unit removal

      For access, remove these FRUs in order:

      LCD Unit removal step 1.

      StepScrew (quantity)ColorTorque
      1M2.5 x 6.5 mm, flat-head, nylon-coated (2)Black0.392 Nm (4.0 kgfcm)

      LCD Unit removal step 2.

      StepScrew capScrew (quantity)ColorTorque
      2LCD unit screw capM2.5 x 6.5 mm, flat-head, nylon-coated (2)Black0.392 Nm (4.0 kgfcm)

      LCD Unit removal steps 3 and 4.

       

      LCD Unit installation

      When installing:

      • Make sure that you route the cables firmly and tape up in the proper positions as shown in this figure.
      • When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

      LCD Unit installation steps 5 and 6.

      When installing: Make sure that the connector is attached firmly.

      LCD Unit installation step 7.

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-72780
      • Document ID: PD003597
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo