• -

      Keyboard bezel and speaker assembly removal - ThinkPad T400s, T410s, T410si

      Keyboard bezel and speaker assembly removal

      For access, remove these FRUs in order:

      Note: The speaker assembly is attached to the keyboard bezel.

      Keyboard bezel and speaker assembly removal step 1.

      StepScrew (quantity)ColorTorque
      1M2 x 6 mm, bind-head, nylon-coated (6)Black0.181 Nm (1.85 kgfcm)

      Keyboard bezel and speaker assembly removal steps 2, 3 and 4.

      StepScrew (quantity)ColorTorque
      2M2 x 6 mm, bind-head, nylon-coated (3)Black0.181 Nm (1.85 kgfcm)
      3M2 x 4 mm, bind-head, nylon-coated (2)Black0.181 Nm (1.85 kgfcm)
      For ThinkPad T400s
      4M2 x 3 mm, small-head, nylon-coated (1)Silver0.181 Nm (1.85 kgfcm)
      For ThinkPad T410s and T410si
      4M2 × 3 mm, small-head, nylon-coated (1)Black0.181 Nm (1.85 kgfcm)

      Keyboard bezel and speaker assembly removal steps 5 and 6.

      Note: Before step [8], pull the cables out from the cable guide hole of the keyboard bezel as shown in the figure [a].

      Keyboard bezel and speaker assembly removal steps 7 and 8.

      Turn the keyboard bezel over, and remove the speaker assembly.

       

      For ThinkPad T400s:

      Keyboard bezel and speaker assembly removal steps 9 and 10.

      StepScrew (quantity)ColorTorque
      10M2 x 3 mm, small-head, nylon-coated (5)Silver0.181 Nm (1.85 kgfcm)

       

      For ThinkPad T410s and T410si:

      72777_kyb_bezel6.gif

      StepScrew (quantity)ColorTorque
      10M2 x 3 mm, small-head, nylon-coated (5)Silver0.181 Nm (1.85 kgfcm)

       

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-72777
      • Document ID: PD003533
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo