Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      PCI Express Mini Card for wireless LAN/WiMAX removal and installation - Thinkpad W700, W700ds, W701, W701ds

      PCI Express Mini Card for wireless LAN/WiMAX removal

      For access, remove these FRUs in order:

      For ThinkPad W700 and W700ds:

      In step [1], unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.

      Note: Some models might have only two antenna cables in step [1].This slot also accepts a PCI Express Half Mini Card.

      Please perform the following steps as shown in the pictures below.

      migr-71637_pci_wimax.gif
      migr-71637_pci_wimax1.gif

      migr-71637_pci_wimax2.gif

      For ThinkPad W701 and W701ds:

      In step [1], unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.

      Please perform the following steps as shown in the pictures below.

      pcicard_01.jpg

      pcicard_02.jpg

      PCI Express Mini Card for wireless LAN/WiMAX installation

      For ThinkPad W700 and W700ds:

      When installing:

      • In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN, and the black cable into the jack labeled AUX on the card. If the computer you are servicing has three cables, put the white cable in the cable holder and place it under the card.
      • In models with wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into the jack labeled TR1, the white cable (3rd) into jack labeled TR3, and the black cable (AUX) into jack labeled TR2 on the card.

      For ThinkPad W701 and W701ds:

      When installing:

      • In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN, and the black cable into the jack labeled AUX on the card. If the computer you are servicing has three cables, put the white cable in the cable holder and place it under the card.
      • In models with wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into the jack labeled TR1, the white cable (3rd) into jack labeled TR3, and the black cable (AUX) into jack labeled TR2 on the card.
      • Make sure that the cables are routed as shown in this figure.

      pcicard_03.jpg

      Purchase parts online

      Search

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71637
      • Document ID: PD003148
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo