Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      ThinkVision L200p 20.1-inch TFT LCD Monitor (6736) - Overview

      ThinkVision L200p

      Files
      Publications
      Service Parts

      Features
      Specifications
      Display size
      20.1-inches
      Display viewable area
      20.1-inches
      Maximum Resolution
      1600 x 1200
      Dot/Pixel Pitch
      0.255 mm
      Dimensions (ThinkVision monitor and stand)
      Weight: 20.9 lbs (9.5kg)
      Height: 18.6 inches (473.0mm)
      Width: 18.4 inches (468mm)
      Depth: 10.2 inches (259.0mm)
      Viewing angle
      Vertical: +/- 88 degrees
      Horizontal: +/- 88 degrees
      Warranty
      3 year Limited - customer carry-in exchange

      Product availability

      Worldwide

      • Announce date: 25 Feb 2003
      • Planned availability date: 28 Feb 2003
      • Withdrawal date: 30 September 2004
      • Effective withdrawal date: 30 September 2004

      At a glance

      The ThinkVision L200p monitor features:

      • ThinkVantage Design
        • Ergonomic stand swivels, tilts, and provides height adjustment
        • Direct access for auto adjustment, brightness and input select
        • Quick and easy monitor adjustments using new designed on-screen-display (OSD)
      • Hybrid system connectivity - analog or digital system attachment
      • Scaling for viewing of full page images of resolutions less than 1600 x 1200
      • Dual input
      • Internal power
      • Kensington lock compatible
      • Lockable digital controls
      • Detachable base allows for mounting on wall or arm

      Shipping contents
      You will receive one box containing the following items:

      • One monitor
      • An attached lift/tilt/swivel stand
      • An attached 1.8 meter analog video signal cable (15-pin D to 15-pin D)
      • DVI-D digital cable
      • A power cord
      • A 3 -> 2 pin AC adapter (Japan only)
      • A Japanese warranty card (Japan only)
      • A CD containing mulitlingual User's Guide, Set-Up Test Pattern, and .INF File
      • Setup Guide
      • Safety and Warranty Information

      Hardware compatibility

      The ThinkVision L200p monitor is supplied with detachable 1.8-meter analog and 1.8 meter DVI-D video signal cables. This monitor has been tested and is compatible with systems and graphics adapters which comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" version 1.0 revision 0.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.

      The ThinkVision L200p LCD monitor is intended to operate with system units or video adapters that generate a video output signal falling within the ThinkVision L200p specification below:

      • Maximum addressability (pixels): 1600 x 1200
      • Maximum pixel rate (MHz): 205 - Analog and 162 - Digital
      The ThinkVision L200p supports VESA Standard Timings for the following modes:
      • VGA: 640 x 480 at 60, 66, 75, and 85 Hz
      • SVGA: 800 x 600 at 56, 60, 72, and 85 Hz
      • XGA: 1024 x 768 at 60, 70, 75, and 85 Hz
      • SXGA: 1280 x 1074 at 60 and 75 Hz
      • UXGA: 1600 x 1200 at 60 and 75 Hz

      Software requirements

      Supported operating systems

      • Microsoft Windows NT 4.0
      • Microsoft Windows 95
      • Microsoft Windows 98
      • Microsoft Windows Me
      • Microsoft Windows 2000
      • Microsoft Windows XP

      Factory-preset PC display modes
      The ThinkVision L200p monitor features factory-preset display modes. The actual display modes used depend upon the attaching system unit, the operating system, and application software

      Addressability (Horizontal x Vertical Pixels)/(Incoming video refresh rate)
      640 x 480 (60 Hz NI)800 x 600 (60 Hz NI)
      640 x 480 (66 Hz NI)800 x 600 (72 Hz NI)
      640 x 480 (75 Hz NI)800 x 600 (75 Hz NI)
      640 x 480 (85 Hz NI)800 x 600 (85 Hz NI)
      640 x 350 (70 Hz NI)832 x 624 (75 Hz NI)
      720 x 400 (70 Hz NI)1152 x 870 (75 Hz NI)
      1024 x 768 (60 Hz NI)1152 x 900 (66 Hz NI)
      1024 x 768 (70 Hz NI)1280 x 1024 (60 Hz NI)
      1024 x 768 (75 Hz NI)1280 x 1024 (75 Hz NI)
      1024 x 768 (85 Hz NI)1600 x 1200 (60 Hz NI)
      800 x 600 (56 Hz NI)1600 x 1200 (75 Hz Ni (Analog - D-Sub Only)

      Technical specifications
      NOTE: Physical specifications shown are at the time of announcement.

      Power requirements

      • Input voltage: 90 to 264 V ac
      • Frequency: 50/60 Hz
      • Heat dissipation (Maximum):
      • Power consumption (Maximum): 65 watts
      • Power consumption (Normal Use): 65 watts
      • Power consumption (VESA Standby): < 3 watts
      • Power consumption (VESA Suspend): < 3 watts
      • Power consumption (VESA Off): < 1 watts
      • Maximum earth leakage current: < 3.5 mA at 264 V
      • Maximum earth leakage current: < 0.25 mA at 100 V

      NOTE: Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set.

      Operating

      • Temperature: 10 degrees to 35 degrees celsius
      • Relative humidity: 10% to 80%
      • Altitude: 0 to 12,000 ft

      Storage

      • Temperature: -20 degrees to 60 degrees celsius
      • Relative humidity: 5% to 95%
      • Altitude: 0 to 12,000 ft

      Shipping

      • Temperature: -20 degrees to 60 degrees celsius
      • Relative humidity: 5% to 95%
      • Altitude: 0 to 35,000 ft

      Product limitations

      • Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video-adapter cards, and application software.
      • Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
      • Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
      • The number of colors shown in any display mode (up to a maximum of 16.7 million) is not limited by the monitor, but depends upon the capabilities of the video adapter in the system unit.
      • The ThinkVision L200p provides FCC class B - residential installation - compliance in all display modes.
      • Dual analog input requires a customer-supplied cable. Depending on the system interface the cable must have DVI-A connectors on both ends or DVI-A on the monitor end and 15-pin D shell connector on the system end.
      • Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
      • Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
      • Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
      • A 20.1-inch TFT monitor has nearly 6.0 million subpixel transistors laid over an area exceeding 193 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The L200p monitor may have up to ten defective subpixels, which includes a maximum of one adjacent pair of "off" sub pixel.
      • Use of 50% background is not recommended since some users may see undesireable FOS effects.
      • The Auto-Setup "test pattern" is available for use with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, and DOS 7.0 only.

      Emissions

      • All announced models meet emission category A requirements of Swedish Standard SS-436-14-90 (MPR-3) in addition to those 1 of MPR-2.
      • All announced models meet the Swedish Board for Technical Ac- creditation (SWEDAC) emission guidelines contained in MPR 1990:10 when tested using the MPR 1990:08 test method.
      • The model 6736-HB0 (Business Black) meets the TCO99 Environmental Label from the Swedish Confederation of Professional Employees (TCO), and the emission, power management, and electrical safety requirements of the TCO99 Environmental Label.

      Ergonomics
      Compliance to the ISO standard ISO/DIS 13406 Part 2 ensures ergonomic requirements are met when the monitor forms part of an ISO-compliant system.

      Regulatory agency approvals

      Safety
      UL (U.S.)CSA (Canada)IEC950 CB ReportNEMKO (Norway)
      SEMKODEMKO (Denmark)FIMKO (Finland)TUV
      CCC (China)NOMSASOGOST
      SISIR CPAMEEIPCBCEZU
      SIQGSHong Kong 
      EMC
      FCC B (U.S.)IC (Canada)AustraliaVCCI Class B (Japan)
      CE (Europe)KoreanNew ZealandBSMI

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-46279
      • Document ID: PD002635
      • Last Updated :26 Mar 2014
      • © 2016 Lenovo