Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      System board, fan assembly, and backup battery removal and installation - Thinkpad X100e

      System board, fan assembly, and backup battery removal and installation

      For access, remove these FRUs in order:

      Following components soldered on the top side of the system board are extremely sensitive. When you service the system board, avoid any kind of rough handling.

      • [a] Accelerometer chip for the HDD Active Protection System™
      • [b] North Bridge
      • [c] CPU
      • [d] South Bridge

      x100e_systemboard_01.jpg

      x100e_systemboard_02.jpg

      x100e_systemboard_03.jpg

      When installing: Make sure that the connectors are attached firmly.

      x100e_systemboard_04.jpg

      When installing: Make sure that the connector is attached firmly.

      DANGER:
      Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.

      x100e_systemboard_05.jpg

      When installing: Make sure that the connectors are attached firmly.

      When installing: Before you attach the fan assembly to the system board, you need to peel the thin film off from the thermal rubbers as shown in this figure.

      x100e_systemboard_06.jpg

       

      Purchase parts online

      Search

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-74402
      • Document ID: PD001016
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo