• -

      Fan assembly removal and installation - IdeaPad S9e and S10e

      For access, remove:

      1. Battery pack
      2. Hard disk drive (HDD) door
      3. Hard disk drive (HDD)
      4. DIMM
      5. Palm rest assembly
      6. PCI Express Mini Card for wireless LAN
      7. Bluetooth daughter card and Bluetooth cable
      8. Keyboard
      9. Keyboard bezel

      Removal steps of fan assembly

      Fan assembly

      StepScrew (quantity)ColorTorque
      [1]M2 × 4 mm, wafer-head, nylon-coated (1)Silver0.181 Nm(1.85 kgfcm)

      Fan assembly

      StepScrew (quantity)ColorTorque
      [8]M2 × 4 mm, wafer-head, nylon-coated (1)Silver0.181 Nm(1.85 kgfcm)

      When installing: Make sure that the speaker connector [5] and the camera connector[7] are attached to the system board firmly.

      In step [10], remove the system board and the fan assembly together from the base cover assembly.

      Fan assembly

      Note: The fan assembly is attached to the underside of the system board.

      Fan assembly

      StepScrew (quantity)ColorTorque
      [1] - [3]M2 × 4 mm, wafer-head, nylon-coated (3)Silver0.181 Nm(1.85 kgfcm)

      Fan assembly

      When installing: Make sure that the fan connector is attached to the system board firmly.

      When installing:

      • Before you attach the fan assembly to the computer, peel the thin film off from the rubber [a].

      Fan assembly

      Purchase parts online

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-71372
      • Document ID: PD013858
      • Last Updated :26 Mar 2014
      • © 2015 Lenovo