• -

      Error messages - 3000 C200; Lenovo N100, N200, N500, V100, V200

      Other error messages, codes, or symptoms
      Beep and no beep symptoms
      Numeric error codes
      Intermittent and undetermined problems
      LCD related symptoms

      If you are unable to find your particular symptom or error, please refer to Need more help?

      Symptom or errorFRU or action, in sequence
      Unsupported memory
      • DIMM. Make sure to use supported memory.
      Device address conflict
      1. Load Setup Defaults in the BIOS Setup Utility
      2. Backup battery
      3. System board
      Allocation error for device
      1. Load Setup Defaults in the BIOS Setup Utility
      2. Backup battery
      3. System board
      Failing bits: nnnn
      1. Reseat DIMM. If the problem still exists, replace the DIMM
      2. System board
      Invalid system configuration data
      1. Reseat DIMM. If the problem still exists, replace the DIMM
      2. System board
      I/O device IRQ conflict
      1. Load Setup Defaults in the BIOS Setup Utility
      2. Backup battery
      3. System board
      Hibernation error
      1. Restore the system configuration to what it was before the computer entered hibernation mode
      2. If memory size has been changed, re-create the hibernation file
      Fan error
      1. Fan
      2. Thermal grease
      3. System board
      Thermal sensing error
      • System board
      Authentication of system services failed
      Press Esc to resume
      • The Predesktop Area on the HD is corrupted, restore it from a recovery CD
      Cannot boot from any device

      Check the status of device which you want to boot from.

      Device not found

      1. The device you want to boot from
      2. System board

      Device Error

      1. The device you want to boot from
      2. System board

      No valid operating system

      1. Check that the operating system has no failure and is installed correctly.
      2. Reinstall the operating system

      Excluded from boot order

      • Enter the BIOS Setup Utility and add the device in boot order.

      Need more help?
      Please select one of the the following options for further assistance:

      How to access the BIOS - Value Line notebooks
      Service parts list index - Value Line notebooks
      Troubleshooting
      Submit a technical question
      Contact your local technical Support Center

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-63542
      • Document ID: HT035789
      • Last Updated :26 Mar 2014
      • © 2015 Lenovo