When using Quad display setup and using the Common User Interface (CUI) to rotate the onboard displays, the discrete video displays may go blank - ThinkStation E30, E31, ThinkCentre M71e, M81, M91, M91p


For a Quad display system, if the user rotates the onboard display using the VGA CUI, the user will see the discrete graphics display go blank. If the user rotates the onboard display using the operating system user interface, the discrete video displays should not be affected.

Affected configurations

The above symptom is associated with, but not limited to, the following systems which is configure with Microsoft Windows 7 32bit and 64bit.

  • ThinkStation E30, E31
  • ThinkCentre M71e, M81, M91, M91, M82, M92, M92p

Applies to:

  • Microsoft Windows 7 32bit and 64bit

Additional Information:

The system is configured with Quad Display; Intel Series 6  & 7 Graphics.


None. Do not replace any hardware for this issue.


This is Quad display limitation for the Intel 6 & 7 series


the user can rotate all these displays in Windows UI, then the discrete video displays will not be affected.

Did this work for you? let us know

  • Alias ID: SF11-D0024
  • Document ID: HT037706
  • Last Updated :17 Jun 2014
  • © 2015 Lenovo