Print
#Account Title#
Search
Unsupported Browser Detected: Dear user, the browser you’re currently using is not supported by this website. Please click here for more information about the browsers we support and how to obtain them.

Summary of changes for BIOS update - ThinkCentre M55p

version 2MKT49A

  • Fixes the issue where Winphlash tool shows 149 error after resume from S3
  • Updates Winphlash tool

version 2MKT48A

  • Fixes the audio item in BIOS Setup which does not match with audio support
  • Fixes the corrupted swipe finger message if ide drive password exist
  • Enhances the Security
  • Fixes the problem where USB HDD cannot boot with fat16 format and 50M partition.

version 2MKT47A

  • Fixes the Recovery fail issue

version 2MKT46A

  • Fixes the problem where Winphlash tool could flash corrupted BIOS
  • Fixes the problem where Flash BIOS with Winphlash tool causes System reboot and blue screen
  • Updates Winphlash tool

version 2MKT45A

  • Fixes the problem of bluescreens after resume from S3

version 2MKT44A

  • Fixes HDD password issue

version 2MKT43A

  • Updates vbios to 1594

version 2MKT42A

  • Fixes a problem where the unit power switches off when Intel 100S NIC is installed
  • Fixes a problem where a NMI parity causes system BSOD and the system hangs
  • Fixes a Intel AMT command which caused the system hang

version 2MKT41A

  • Fixes a problem where the system hangs when install RAID1 with 2 HDD and USB HDD
  • Fixes a problem where power on with some kind of memory would cause system hang up and show rubbish

version 2MKT40A

  • Fixes the problem where Esc key becomes abnormal when swiped in the fingerprint reader
  • Fixes the problem where PXE booting hangs after running ABORTPXE.COM
  • Fixes the problem where POST error message ("0232: Extended RAM Failed") randomly appears in system with less than 4G memory
  • Updates BAR code
  • Fixes the problem where system escapes pop after ctrl-alt-del when swiped in the fingerprint reader

version 2MKT39A

  • Fixes the fingerprint keyboard resume workaround

version 2MKT38A

  • Fixes the fatal error at TP DAh with ATI Fire MV 2400 in PEG slot
  • Fixes the TP 49h hang with HP 82350A GPIB card
  • Fixes the intermittent problem where the hard disk drive gets corrupted
  • Fix the S3 resume failure issue of Windows Vista when a random check for USB mouse or Keyboard is done.

version 2MKT37A

  • Fixes a problem where the fingerprint reader is not detected
  • Fixes intermittent com port errors in BurnInTest (XP)
  • Reinstates support for certain old USB floppy drives
  • Removes AHCI support from -G/-GF boards even if they have an AHCI-capable ICH SKU
  • Fixes odd behavior on some fingerprint keyboards
  • Fixes a PC-Doctor problem where the keyboard and/or mouse do not work after USB Loopback test
  • Fixes a PC-Doctor problem where the keyboard and/or mouse do not work after many runs of USB Loopback test
  • Updates CPU Microcode

version 2MKT36A

  • Fixes a failure in PC-Doctor with specific Seagate Nighthawk drives
  • Adds Setup Summary display of memory Dual/Single channel mode
  • Reports cover tamper in DMI Type 3 structure. On tamper, we will set BootUp Status to WARN; otherwise, SAFE
  • Fixes 0162 error after srcmos armsfdd
  • Fixes a problem where the system fails to boot from Corsair Flash Voyager USB key
  • Fixes a problem where the ATI Fire MV 2400 card has two pci devices
  • Fixes AMT error after clearing fingerprint
  • Fixes intermittent AMT "corruption", Setup sub-menu all Disabled
  • Adds the item '/P' in help file ("Readme.1st")

version 2MKT35A

  • Fixes a problem where the system shows an "Adapter ROM Checksum Error" with PEG card

version 2MKT34A

  • Fixes a problem where the system fails to detect large (500GB) hard drives
  • Fixes a problem where the system fails to detect a certain nVidia video card
  • Fixes a problem where the USB devices are not recognized normally after S3 when attached to the front USB port
  • If your system contains a Core 2 Duo processor, Lenovo strongly recommends updating the system BIOS which contains updated CPU microcode files

version 2MKT33A

  • Fixes lurking memory corruption on S3 resume
  • Adds support for USB 2.0 split transaction
  • Adds support for USB provisioning from floppy-formatted key
  • In USB provisioning, instead of zeroing the entire record, zero only the data portion, and the Valid flag in the header

version 2MKT32B

  • Updates Conroe CPU microcode

version 2MKT32A

  • Fixes a problem where the system fails to update TCG PP (Physical Presence) from operating system (Move TCG PHS call from _SST back to _PTS, CRB was wrong)
  • Fixes a problem where Quatech dsc-100-550 causes POST error 1805 (Add support for non-PNP option roms)
  • Fixes "Invalid password in case setting pop with ten keys"
  • Fixes a problem where huge hard drives are not recognized
  • Fixes a problem with AMT USB Key provisioning where SETUP.BIN occupies multiple clusters
  • Fixes a problem where GetAssetData fails

version 2MKT31A

  • Fixes a problem with slow SOL video after POST
  • Fixes a problem where pressing F2 on console side can't make client enter BIOS SETUP when SOL is active
  • Fixes a problem where the system will not boot to network (Actual symptom: Kill AC + battery, won't boot to network on first POST, only second and subsequent)
  • Fixes a problem where an unsupported system shows the Cover Tamper setting

version 2MKT30A

  • Fixes a problem where a corrupt screen randomly appears at POST screen

version 2MKT29A

  • Fixes a problem where the hard drive LED is always lit on select systems that have no slim optical drive
  • Fixes a problem where the system cannot detect a PCI-E 1x LAN card
  • Fixes a problem where the system shows a yellow mark for PCI-Express ports under windows when 4GB memory is installed

version 2MKT28A

  • Fixes a problem where the system hangs at POST screen after ME is disabled
  • Fixes a problem where a USB key for factory mode setup does not work
  • Fixes a problem where a wake event is always logged as 'unknown'

version 2MKT27A

  • Updates VGA BIOS to build 1371
  • Fixes a problem where the keyboard does not work properly after boot
  • Fixes a problem where a CMOS failure does not reset the Startup Sequence

version 2MKT26A

  • Enhances Fan Acoustics function in high mode
  • Fixes a problem where 186 and 190 POST errors do not stop POST
  • Fixes a problem where the system hangs at hard drive config screen when install Windows 2000
  • Fixes a problem where the keyboard does not work when install Windows XP with an NVIDIA 7300LE video adapter
  • Fixes a problem where enabling AMT causes the onboard LAN to be unavailable

version 2MKT25A

  • Fixes a problem where some Setup screens do not match help
  • Fixes boot block recovery from USB CD-ROM
  • Fixes a problem where IGD cannot start in Windows XP with PCIe-x1 card installed
  • Fixes a problem where the system hangs or displays a bluescreen error when insalling Windows Vista with PEG card
  • Fixes a problem where the system hangs after installing ATI X300 driver on Windows 2000
  • Fixes an intermittent hang or bluescreen in Windows XP with Ricoh USB printer

version 2MKT24A

  • Updates fan control support for the CPUID 0F49 processors
  • Removes exclamation marks in Device Manager when a PCI video card is installed
  • Ensures that the system can boot the primary boot sequence after a dead battery is replaced
  • Updates SMBIOS processor socket information
  • Adds additional TCG Vista updates
  • Fixes a problem where the system hangs immediately after updating the BIOS to level 23
  • Fixes a problem when the CPUID is limited to 3
  • Prevents corrupting boot block if it is updated after completing the manufacturing process
  • Fixes a highly infrequent problem when a USB device is plugged in to the system, BIOS USB keyboard emulation is enabled, and USB control is being handed off to Windows

version 2MKT23A

  • Various TCG code updates required for Vista
  • Updates the Audio Verb Table for Vista

version 2MKT22A

  • Corrects a problem setting up the caches on systems with the Intel® Core™2 Duo Processors. It is strongly recommended that systems with this processor update the BIOS to this level.
  • Fixes a problem determining the day of the week when the user sets up a weekly wake-up event through the BIOS Setup program

version 2MKT21A

  • Fixes minor Setup text issues and corrects the LPT mode and hard drive timeout defaults
  • Fixes a problem where the system hangs during boot block recovery from a USB CDROM
  • Ensures the system will boot to the flash diskette if it is in the diskette drive
  • Fixes a problem that occurs during PXE boot from a PCI network card
  • Ensures we do not get a 1762 POST error when a user plugs in or removes a USB Key and a password is installed or the system uses enhanced POST mode
  • Fixes a problem where there is long delay in POST or the system fails to detect the Sony SDX-470V SATA tape drive
  • Fixes a problem where the system hangs at an "EE" checkpoint with certain processors
  • Fixes a problem where Wake On LAN always follows primary boot sequence
  • Fixes a problem disabling the Wake On LAN function
  • Fixes ASF watchdog timeout errors

version 2MKT20A

  • Initial Production Release

  • Alias ID: MIGR-66273
  • Document ID: HT036389
  • Last Updated :17 Jun 2014
  • © 2015 Lenovo