Cannot completely disable Intel® Active Management Technology DHCP feature when disabling AMT in BIOS - ThinkCentre M58, M58p


For the M58/M58p machine, the AMT by default will enable DHCP, so that before it boots up into the operating system, it will get an IP address from the DHCP server. When disabling AMT in system BIOS cannot completely disable the AMT DHCP features.

Affected configurations

Any of the following systems but not limited to the following systems:

  • ThinkCentre M58 (all models)
  • ThinkCentre M58p (all models)

Applies to:

  • All Operating Systems

The user must enter the AMT (press Ctrl p) to disable the DHCP first, then disable the AMT in BIOS.

Click here to view the instructions


Completely disable AMT - The only way to do this is physically sit at the PC, go into the AMT menu and set the AMT options to "none". There is no way to do this remotely because of AMT security considerations.

Did this work for you? let us know

  • Alias ID: SF10-D0098
  • Document ID: HT002445
  • Last Updated :17 Jun 2014
  • © 2015 Lenovo