Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      What are the LED status indicators (lights) on the LCD? - ThinkPad T60, T60p

      The following table shows what the LED status indicators are for and what the different colors or blinking of the lights mean.

      ThinkPad T60 and T60p status indicators Wireless statusBluetooth statusWireless WAN statusNum lockCaps lockDrive in usePower onBattery statusAC power statusStandby statusUltrabay Enhanced statusStandby statusAC power statusBattery status


      Index numberLED indicatorLED indicator meaning
      1Wireless status
      Wireless status indicator
      Green:
      The wireless feature (the IEEE 802.11 standard) is on, and the radio link is ready for use.
      Blinking green:
      Data is being transmitted.
      2Bluetooth status
      Bluetooth status indicator
      Green:
      Bluetooth wireless is operational. This indicator is on when Bluetooth wireless is on and not in suspend mode.
      3Wireless WAN status
      Wireless WAN status
      Green:
      The wireless WAN is on, and the radio link is ready for use.
      Blinking green:
      Data is being transmitted.
      4Num lock
      Num lock indicator
      Green:
      The numeric keypad on the keyboard is enabled. To enable or disable the keypad, press and hold the Shift key, and press the NumLk (ScrLk) key.
      5Caps lock
      Caps lock indicator
      Green:
      Caps Lock mode is enabled. To enable or disable Caps Lock mode, press the Caps Lock key.
      6Drive in use
      Hard disk drive status indicator
      Green:
      Data is being read from or written to the hard drive, the diskette drive, or the drive in the Ultrabay Slim device. When this indicator is on, do not put the computer into standby mode or turn off the computer.
      Note:
      Do not move the system while the green drive-in-use light is on. Sudden physical shock could cause drive errors.
      7Power on
      Power on indicator
      Green:
      The computer is on and ready to use. This indicator stays lit whenever the computer is on and is not in standby mode.
      8Battery status
      Battery status
      Green:
      The battery is charged between 80% to 100% of the capacity, and being discharged between 20% to 80% of the capacity.
      Blinking green:
      The battery is charged between 20% to 80% of the capacity, and being charged.
      Orange:
      The battery is charged between 5% and 20% of the capacity, and being discharged.
      Blinking orange (slow):
      The battery is charged between 5% to 20% of the capacity, and being charged.
      Blinking orange (rapid):
      The battery is charged between 0% to 5% of the capacity.
      9AC power status
      AC power status
      Green:
      The computer is connected to the ac power supply.
      10Standby status
      Standby status indicator
      Green:
      The computer is in standby mode.
      Blinking green:
      The computer is entering standby mode or hibernation mode, or is resuming normal operation.
      11Ultrabay Enhanced statusGreen:
      An Ultrabay Enhanced device is installed and in use.
      Blinking green:
      An Ultrabay Enhanced device is in the process of being detached.
      Turn off:
      An Ultrabay Enhanced device is ready to be attached or detached.
      Note: If you are using Windows 2000, the Ultrabay Enhanced status indicator does not blink while an Ultrabay Enhanced device is being detached. Instead, a message box pops up when the process is completed; then the indicator turns off.

      Was this information helpful?

      Your feedback helps to improve this site.

      • Alias ID: MIGR-62718
      • Document ID: HT001938
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo