Виявлено браузер, який не підтримується

Веб-сайт служби підтримки компанії Lenovo підтримує Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ та будь-який інший сучасний веб-браузер.

      How to use the PC Card/ExpressCard slot - Notebooks

       Supported Systems
       Slot locations
       Card types and terms
       Installing the card
       Removing the card
       Supported software
       Power management

      Supported Systems
      The following systems are ExpressCard compatible:
      • 3000 V100
      • ThinkPad R51e, R52, R60
      • ThinkPad T43, T43p, T60, T60p
      • ThinkPad Z60m, Z61e, Z61m

      The following systems are Type I and Type II PC Card compatible:

      • 3000 C100, C200, N100, V100
      • ThinkPad R60
      • ThinkPad S30, S31
      • ThinkPad T43, T43p, T60, T60p
      • ThinkPad X20, X21, X22, X23, X24, X30, X31, X32, X40, X41, X41 Tablet, X60, X60s, X60 Tablet
      • ThinkPad Z60m, Z60t, Z61e, Z61m, Z61p, Z61t

      The following systems are Type III PC Card compatible:

      • ThinkPad A20m, A20p, A20m, A21e, A21m, A21p A22m, A22p, A22e A30, A30p, A31, A31p
      • ThinkPad G40, G41, G50
      • ThinkPad R30, R31, R32, R40, R40e, R50, R50p, R51, R52
      • ThinkPad T20, T21, T22, T30, T40, T40p, T41, T41p, T42, T42p
      Back to top

       

      Slot locations
      • Upper slot: ExpressCard
      • Lower slot: PC Card

      Note: If your system has only one slot, it does not support an ExpressCard.

      Back to top


      Card types and terms
      • PC Card - A credit card-sized device that can be used for a variety of functions, including a flash memory card, network card, modem, or hard drive.
        • Type I - Primarily used for adding RAM to a laptop PC.
        • Type II - Similar to Type I card; featuring a 16-bit or 32-it interface, using two rows of pins.
        • Type III - Uses four rows of pins with a 10.5 mm thickness, allowing the accommodation of larger connectors for peripherals. Since the removal of legacy ports from most modern laptops, type III ports are typically no longer used.
      • CardBus Card - A 32-bit PC Card with bus mastering, which allows a controller on the bus to talk to other devices or memory without going through the CPU.
      • ExpressCard - Replaced CardBus technology, with an increase in bandwidth due to the fact that it establishes a direct connection to the system bus.
      Back to top


      Installing the card
      Attention:
      • Do not insert a PC Card or an ExpressCard while the computer is in standby mode or hibernation mode. If you do, the computer may not respond when you try to resume using it.
      • Before you start installing any of the following cards into the ExpressCard/PC Card slots, touch a metal table or a grounded metal object. This action reduces any static electricity from your body.

      To install a PC Card or an ExpressCard, do the following:



      Note: This illustration is demonstrating how to install a card on a Z61m. The location of the PC card slot will vary depending on the type of system.
      1. Find the notched edge of the card.
      2. Insert the card into the slot. If you are using an ExpressCard, insert it into the upper slot.

      Note: If you are inserting a 34 mm-wide ExpressCard into the slot, make sure that the back side of the slot and that of the card are aligned with each other.

      The slots have a cover. To insert a card, just push the cover. Press the card firmly into the connector. 

      Note: If a card is not Plug and Play, you may have to use the Add/Remove Hardware wizard. Double-click the Add/Remove Hardware icon in the Control Panel.

      54 mm-wide ExpressCard34 mm-wide ExpressCard
        
      54-mm-wide-express-card34mm-wide-express-card


      Back to top


      Removing the card
      Attention:
      • Before removing a storage PC Card, such as a hard disk PC Card, a Flash memory PC Card, or a SRAM PC Card, from a PC Card slot, you must stop the PC Card. Otherwise, data on the PC Card might be corrupted or lost.
      • Do not remove a PC Card or an ExpressCard while the computer is in standby mode or hibernation mode. If you do, the system will not respond when you try to resume operation.

      You can stop the PC Card with the PC Card support software and remove it, without turning off the computer.

      • For Microsoft Windows XP users: Click the Safely Remove Hardware icon in the task bar, and then stop the card.
      • For Windows 2000 users: Click the Unplug or Eject Hardware icon in the task bar, and then stop the card.

      Notes:

      • To stop the card, you can also use EasyEject Utility.
      • This illustration is demonstrating how to install a card on a Z61m. The location of the PC card slot will vary depending on the type of system.

      To remove the card, do the following:

      1. Press the card eject button to pop out the button.
      2. Then press it again until the card pops out.
      3. Remove the card and store it safely for future use.

      Note: If you do not remove the card after selecting the Safely Remove Hardware icon to stop the function of the drive, the card can no longer be accessed. To access the card, you must remove it once, then insert it again.

       

      Back to top

       

      Supported software
      The PC Card support software enables you to use a PC Card as soon as you insert it into the computer.

      For Windows XP or Windows 2000, no extra software is needed; the PC Card support function is included in the operating system.

      When you insert the PC Card into your system:

      • The PC Card support software detects the card, reads the information about it, and searches for the device driver needed.
      • The device driver requests the PC Card support software to allocate such system resources as memory space, I/O port, and IRQ. If these resources are available, the support software recognizes the PC Card, and you can use it.

      If there is a resource conflict, you may need to do follow one of the following:

      • Change the resource assignment: You can allocate the available resources by using the operating system or the PC Card support software function.
      • Change the system configuration: You can change the system configuration with your operating system or with the ThinkPad Configuration Program.

      Back to top


      Power Management
      Depending on the function of the PC Card, changing the power mode may cause your system not to respond. PC Card support software prevents this occurrence through special handling during transition between power states.

      Чи були ці відомості корисні??

      Ваші відгуки допоможуть покращити цей веб-сай..

      • Alias ID: MIGR-67445
      • Document ID: HT000937
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo