Kullandığınız Browser desteklenmemektedir

Lenovo support web sitesi Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ Browserlarını desteklemektedir

      System cannot boot to the next device after PXE boot times out - ThinkCentre, ThinkStation

       

      Symptom

      The system is configured to boot to PXE first and then the hard disk drive.  The user turns the system on and it fails to PXE boot or the user presses Escape to abort the PXE boot.  The boot sequence continues to the next device and the system hangs.

      Affected configurations

      The above symptom is associated with the following systems:

      • ThinkCentre M72e, Edge 72e, M82, M92, M92p, Edge 92
      • ThinkStation E31
      Operating Systems
      • All Operating Systems
      Solution

      The user should update the BIOS as applicable below:

      ThinkCentre M72e:

      F1KT52A (or higher) / F4KT40A (or higher):

      Please click here to update the BIOS.

      ThinkCentre Edge 72e:

      F1KT52A (or higher):

      Please click here to update the BIOS.

      ThinkCentre M82/ M92/ M92p/ Edge 92:

      9SKT68A (or higher):

      Please click here to update the BIOS.

      ThinkStation E31:

      9SKT68A (or higher)

      Please click here to update the BIOS.

      Perform the following after updating the BIOS:

      1. In BIOS Setup (F1), go to the “Startup” screen.
      2. Set “Boot Mode” to “Legacy Only”.
      3. Press F10 and Enter to Save and Exit.
      Additional Information

      The PXE boot image is not a UEFI image.

       

      Bu bilgi yararlı oldu mu??

      Geri bildiriminiz bu siteyi geliştirmemize yardımcı olacaktır..

      • Alias ID: SF13-D0146
      • Document ID: HT078444
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo