En webbläsare vi inte stöder har upptäckts

Lenovo Support webbsidan stöds av Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      Intel SATA Controller AHCI Driver for Windows 7 (32-bit), XP- Notebook

      Tillbaka#ProductName# - Nedladdningar

      Namn
      Operativsystem
      Version
      Utgivet
      Ladda ner nu
      Checksum Data
      Intel SATA Controller AHCI Driver
      exe
      530.91 MB
      Windows 7 (32-bit)
      Windows XP (32-bit)
      11.2.0.1006
      12/4/2012
      README for Intel SATA Controller AHCI Driver
      txtreadme
      11.51 KB
      Windows 7 (32-bit)
      Windows XP (32-bit)
      11.2.0.1006
      12/4/2012

      This package installs the software (Intel Chipset driver) to enable the following devices:

      • Intel (R) 7 Series Chipset Family SATA AHCI Controller

      Note:

      • If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.
      • This program is language independent and can be used with any language system.

       

      Contents
      Supported Systems
      Supported Operating System
      Summary of changes
      Installation Instructions
      Determining which version is installed

       

      Supported Systems
      • Lenovo B480, B490, B580, B590, V480, V480c, V480s, V580, V580c, M490, E49
      • Edge E330, Edge L330
      • Zhaoyang K29, K49, E49

      Supported Operating System
      • Microsoft Windows 7 32-bit
      • Microsoft Windows XP
      Summary of Changes

      Where:

      • < > Package version numbers
      • [Important] Important update
      • (New) New function or enhancement
      • (Fix) Correction to existing function

      Version 11.2.0.1006

      • (Fix) Fixed an issue where BSOD occurs on Intel VGA configuration.

      Version 11.0.0.1032

      • (New) Added support for Microsoft Windows XP for ThinkPad Edge E330.
      • (New) Added support for Lenovo V480s.
      • (New) Added support for ThinkPad Edge L330
      • (New) Added support Microsoft Windows 7 for ThinkPad Edge E330
      • (New) Added support Microsoft Windows XP for Lenovo E49, Zhaoyang K29, K49, E49
      • (New) Added support Microsoft Windows XP for Lenovo V480, V580, B480, B580.
      • (New) Added support for Lenovo E49, Zhaoyang K29, K49, E49
      • (New) Initial release for Lenovo V480, V580, B480, B580

      Note:
      Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

       

      Installation Instructions

      Notes:

      • If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Determining Which Version is Installed section.
      Manual Install

      This section assumes to use Internet Explorer and Windows Explorer.

      [Downloading file]

      1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
      2. Follow the instructions on the screen.
      3. In the window to choose Run or Save, click the Save button.
      4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

       

      Clean Install

      [Window 7 32-bit]

      1. Start Windows 7 and logon with an administrative privileges.
      2. Click Start, then click Control Panel.
      3. Click System and Maintenance, then click System.
      4. Click Device Manager.
      5. Expand the IDE ATA/ATAPI controllers category.
      6. Right-click Standard AHCI 1.0 Serial ATA Controller and then select Update Driver Software...
      7. Click Browse my computer for driver software.
      8. Click Browse..., then select the driver location and then click Next.
      9. Click Close when the installation has completed.
      10. Click Yes to restart the computer.
      Update Install

      To update the driver, follow the instructions below:

      [Windows 7 32-bit]

      Note: This is for administrator use only.

      1. Start Windows 7 and logon with an administrative privileges.
      2. Click Start, then click Control Panel.
      3. Click System and Maintenance, then click System.
      4. Click Device Manager.
      5. . Expand the IDE ATA/ATAPI controllers category.
      6. Right-click
        Intel(R) 5 Series 4 Port SATA AHCI Controller or
        Intel(R) 5 Series 6 Port SATA AHCI Controller or
        Intel(R) 5 Series/3400 Series SATA AHCI Controller
        or
        Intel(R) 7 Series Chipset Family SATA AHCI Controller or
        Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller or
        Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller or
        Intel(R) ICH10D/DO SATA AHCI Controller or
        Intel(R) ICH10R SATA AHCI Controller or
        Intel(R) ICH7M/MDH SATA AHCI Controller or
        Intel(R) ICH7R/DH SATA AHCI Controller or
        Intel(R) ICH9M-E/M SATA AHCI Controller or
        Inter(R) Mobile Express Chipset SATA AHCI Controller
        and then select Update Driver Software...
      7. Click Browse my computer for driver software.
      8. Click Browse..., then select the driver location and then click Next.
      9. Click Close when the installation has completed.
      10. Click Yes to restart the computer.
      Determining which version is installed
      1. Click Start, then click Control Panel.
      2. Click System and Security, then click System.
      3. Click Device Manager.
      4. Click the + sign in front of the IDE ATA/ATAPI controllers.
      5. Double-click Intel(R) 7 Series Chipset Family SATA AHCI Controller.
      6. Click the Driver tab. Then you will see the Driver Version.

      • Alias ID:
      • Document ID:DS029308
      • Last Updated :23 Jun 2014
      • © 2015 Lenovo