En webbläsare vi inte stöder har upptäckts

Lenovo Support webbsidan stöds av Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      Fn + F7 Key Combination Cannot Enable Clone Mode With Optimus Graphics for Windows 7 - ThinkPad

       

      Symptom

      In Microsoft Windows 7, Clone Mode (same image on both the ThinkPad LCD and an external monitor) may not function when using the Fn + F7 key combination on ThinkPads that have Optimus graphics. Depending upon what combination of display devices are being used, Optimus may use two different video adapters: integrated Intel graphics and discrete NVIDIA graphics. Because two different graphics adapters may be in use, Windows 7 may not be able to correctly set up Clone Mode.

       

      Affected Configurations

      Any of the following systems with NVIDIA Optimus graphics, running Windows 7, where the machine is set in BIOS to run in Optimus mode:

      • ThinkPad L430
      • ThinkPad T420, T420i, T420s, T420si
      • ThinkPad T430, T430i, T430s, T430si, T430u
      • ThinkPad T520, T520i
      • ThinkPad T530, T530i
      • ThinkPad W520, W530

       

      Additional Information

      The following shows what display ports are controlled by the different display adapters.  If the display configuration you are using involves both the Intel and NVIDIA graphics adapters, Fn + F7 will not work correctly.

      ThinkPad T420, T420i, T420s, T420si, T520, T520i

      • NVIDIA NVS 4200M
        • Computer's DisplayPort connector
        • Docking Station's DVI connector(s) or DisplayPort connector(s)
      • Intel HD Graphics Family
        • (Computer's LCD)
        • Computer's analog VGA connector
        • Docking Station's analog VGA connector


      ThinkPad W520

      • NVIDIA Quadro 1000M or NVIDIA Quadro 2000M
        • Computer's analog VGA connector
        • Docking Station's analog VGA connector
        • Computer's DisplayPort connector
        • Docking Station's DVI connector(s) or DisplayPort connector(s)
      • Intel HD Graphics Family
        • (Computer's LCD)

       

      Solution

      Clone Mode in Optimus using two graphics adapters is only supported and configured through the NVIDIA Control Panel.  It can not be enabled by using the Windows display control (Fn + F7) or the Intel display control panel.

      Search

      Var den här informationen användbar??

      Dina synpunkter hjälper till att förbättra webbplatsen.

      • Alias ID:
      • Document ID: HT063005
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo